Vacuum Sewer Cleaner With JUROP Pump

COMPONENT

SPECIFICATION

Engine

Engine model WD615.69, SINOTRUK make,   Diesel, turbo charged, water cooled

Built for export tier III

HP340 at 2200RPM

Exhaust brakes

Transmission

AMT

Model HW20716A, Make SINOTRUK

Cab

Two   (2) man inclusive of driver

Complete   instrumentation & driving controls manage all truck function

AM /   FM Radio/CD player

Air condition   factory installed

Fitted   with 2kg fire extinguisher

Fitted   with LED Lighting

Driver’s   seat pneumatic suspension

Steering

Hydraulically   powered

Primary   box located on right hand side of chassis

Axle configuration

6 x4

Front axle (non-driving) rated at 20943   lbs

Rear tandem axles rated at 70547 lbs

Braking   System

Full   air with dual action actuators with spring brake acting on rear wheels

Electrical   Systems

24 Volts

Chassis  

Integral   front frame extension to accommodate the following:

·           Hose   reel

·           Operator’s   station

Frame   Strength minimum 120,000 PSI

Frame   -Outer C – channel re-enforcement the entire length

Operator’s   station

Rear   mounted control box lockable & fitted with a viewing window

Complete   instrumentation and operating controls to manage all sewer cleaning and   vacuum functions. This include the following:

-Vacuum   pump hour meter

-Water   pump hour meter

-Hydraulic pressure gauge

-Vacuum gauge

-Water pressure gauge

-Electric chassis engine throttle

-Hose reel directional control

-Water level display in control box

-Low water level alarm shall be both audible and   visible on top of control box

-Remote   control

Front   Mounted Hose Reel

Hose   Reel Capacity of 600’ minimum

1”   thermoplastic, flexible and kink resistant

Rear   Mounted Hose Reel

Designed   in such a way as to allow operator and maintenance personnel to open engine   hood without the use of the truck engine

Rear   Mounted Hose Reel

Traverse   an arc of 180° across the work station and be equipped with an air brake to   hold it in position

Constructed   from ¼” steel

Footage   counter be installed on the reel shaft with digital readout mounted at the   operator’s station

Driven   via hydraulically powered gear box

A   deflector scoop installed below the hose reel to direct cooling air to the truck’s   radiator

Water   Storage Tank

Capacity   of 1,500 gallons

Cylindrical   wrapped in shape and constructed of 3/16” thick Stainless   steel 304

pressure   tested and guaranteed to contain no leaks

Equipped   with a fill system using standard fire hose fittings

have a   20” top mounted port for inspection

mounted   above the chassis frame rails to provide a flooded inlet for the water pump

Debris   Body

Cylindrical   in shape and constructed of 3/16” thick Stainless steel   304

have a   dished forward tank head and dished rear door

Capacity   shall be 7yd3 minimum

Material   enter the debris body through a top mounted air-backed debris chute to reduce   wear

Rear   door be equipped with four (4) independent, fully adjustable hydraulic locks,   each of which be operated with an independent hydraulic cylinder

Debris   body

Rear   door open/close with two (2) hydraulic cylinders

Debris   body be equipped with 12” stainless steel float ball

Shut   off valve mounted at the front of the debris body

Dump   controls be located forward of the tank assembly

Vacuum   Pump

JUROP   (Italy) PVT1000 Roots type, rotary positive displacement pump with a rated   capacity of 3,770CFM at 25.5”Hg

engine   driven via a transfer case

fitted   with cyclone separator with 20” chamber

Silencer fitted with rain cap and bottom drain

Vacuum relief valve is air operated

Water   Pump

Make   by URACA (Germany) Model of KD718, shaft driven via transmission mounted PTO

triple   X design with a discharge pressure of 2,465PSI at 87GPM

triple   X design with a discharge pressure of 2,465PSI at 87GPM

Adjustable   low pressure water spray gun with 50’x½” hose and quick disconnect fittings   shall be installed at the rear of the Tank