•Model Number CSC5071TSL6
•Hopper Capacity 4.2 m³
•Water Tank Capacity 1.2m³
•4 no. of Disc Brushes
•Single Suction Mouth,hydraulic
•JMC 87hp Auxiliary engine
Truck mode | CSC5071TSL6 | |
Sweeping performance | Sweeping Efficiency | ≥95% |
Max. Sucking Dust Diameter | 120 mm | |
Sweeping Width | 2.8-3.0 m | |
Max. Sweeping Capacity | 60000 m2/h | |
Extensive Length of disc brush | ≥400 mm | |
driving speed while sweeping | 3-20 km/h | |
Auxiliary engine | brand | JMC |
Model | JX | |
Horsepower | 87HP | |
Water tank | Water Tank Capacity | 1200lt |
Water Tank Material | 304 stainless steel | |
Hopper | Hopper Capacity | 4.2 m³ |
Hopper Material | 304 stainless steel | |
Hopper Thickness | 3mm | |
titling angle of the garbage container | ≥46° | |
titling angle of discharge door | ≥85° | |
Hydraulic | Mold | electrical control |
main components | Gear pump, hydraulic motor, hydraulic cylinder, and electromagnetic valve | |
pressure | 16 MPa | |
capacity of the hydraulic oil | 60 L | |
Temperature of the oil | 60 ˚C | |
Hydraulic multi-way valve brand | Taiwan | |
Hydraulic oil tank Cap. | 60lt | |
Electrical System | Mold | DC12 V |
Voltage | 12 V | |
Battery | 12V | |
Control switches brand | Schneider | |
Spraying system | main components | Electrical membrane pump, water filter, nozzles |
Disc Brushes | type | 4 disc brushes located, driven by hydraulic motor; front right brush could be controlled separately, it has the function of avoiding and reset |
diameter of the brush | ≥450 mm | |
sweeping titling angle | Front:4-6 degree side :4-7 degree | |
suction device | type | Single Suction Mouth,hydraulic control |
Moving pipe | Pipe length | 4m |
Pipe diameter | 6” | |
Middle Brush | Installed | 1pc |
Vacuum | Capacity | 13.200m3/hr |
Water | Sprinkling pressure | 4bar |
Nozzle units | ≥12pcs |
2.spare parts
Ref. | Part name | Quantity |
1 | Brushes | 88pcs |
2 | seal strip for fan | 1pc |
3 | seal strip for rear door | 1pc |
3. Function features
1-Adopt the combination of suction and sweep to collect garbage, wet dust removal, electro-hydraulic control, hydraulic tipping and unloading operations to clean the road surface.
|
2-The auxiliary engine is used to drive the fan and hydraulic system, to ensure that it can continue to work during driving and ensure the continuity of the cleaning process
|
3-The disc brushes have the function of avoiding and reset.
|
4-It adopts a full-floating suction nozzle which can be automatically leveled with the road surface, with good dust suction effect and long service life.
|
5-There are four-disc brushes & rear suction nozzles, which is convenient for the adjustment and maintenance of the cleaning device, and the truck has a good pass ability during the transition.
|
6-There is an automatic clutch between the auxiliary engine and the fan, which can ensure the automatic separation of the auxiliary engine from the fan when the auxiliary engine starts and stops without load, reduces the impact on the auxiliary engine, and improves the working reliability and service life of the auxiliary engine.
|
7-High-quality hydraulic motor can ensure the working stability of the disc brushes, and has a long service life
|
8-The precision seamless cold-formed hydraulic oil pipe, have no oxidation impurities on the inner wall to ensure that the hydraulic oil circuit is clean and does not block the valve.
|
9-304Stainless steel water tank and dustbin increase the service life of the tanks.
|
10-The tipping angle of the garbage tank is bigger than 46 degrees, which make it easier to dump garbage.
|
11-The imported hydraulic valve group can ensure the stability and smoothness of the hydraulic action of the whole vehicle.
|
12-According to different cleaning conditions, without increasing the auxiliary engine throttle, the sweeping brushes have high, middle and low gears to be adjusted, which can ensure a good cleaning effect under various pollution conditions, and also saving fuel consumption and loss of bristles
|
13-The high-performance engineering plastic spacer is used in the sweeping brush arm, has good abrasion resistance, free of feeding grease and maintenance.
|
14-The ultra-wide back door and the opening angle greater than 85 degrees make it easier to dump garbage and clear the garbage tank.
|
15-The outturned suction hose made of imported raw materials can effectively prevent the suction tube from being scratched and frozen, and increase the service life.
|
16- High pressure hose reel will be supplied for cleaning of road sweeper
|
Hot Tags: municipal street sweepers body only, China, manufacturers, suppliers, factory, price, quotation, for sale, high quality, high performance