Street Sweeper Truck Superstructure

PARTS ITEM MODEL

1) General Information

1.1 Make & Model

CSCTRUCK / SB05

1.2 Date of Manufacturing

2023

1.3 Country of Origin

China

1.4 Truck Unit’s Status

Brand new

1.5 Overall Dimension

(L x W x H)

4,500x2,060x2,200 mm

1.6 Curb Weight

2,970mm

1.7 Maximum Sweeping Width

3.2m

1.8 Maximum Sweeping Performance

60,000m2/h

1.9 Sweeping Speed

3~30km/h

1.10 Side Circular Brush

Φ850mm

1.11 Cylinder Brush

Φ400mm

1.12 Air Blower

3000rpm

1.13 Auxiliary Engine

95hp

2) Tank

2.1 Composite

Water Tank and Garbage Tank

2.2 Capacity

5 m3 (4m³ garbage tank+1,000L water tank)

2.3 Material

304 stainless steel

2.4 Dumping By

A telescopic cylinder lifts the garbage tank

2.5 Dumping Angle

≥55°

3) Auxiliary Engine

3.1 Make/Model

ISUZU/4JB1-TC1

3.2 Type

Four-injection, water-cooling, turbo-charged, diesel engine

3.3 Power

95HP (70kw) @ 3400rpm

3.4 Fuel

Diesel

4) Air Blower

4.1 Type

High-pressure, centrifugal, sweeping truck specifically used

blower

4.2 Working Speed

2600～3000r/min

4.3 Driving Mode

Drive by the ancillary engine, automatic clutch, V belt powered

5) Hydraulic System

5.1 Type

Electro-hydraulic Centralized Control

5.2 Main Components

Gear pump, Gerotor motors, Hydraulic cylinders, solenoid valves, IC, manual pump, etc.

5.3 Oil Pressure Relief

14MPa

5.4 Hydraulic oil level

In 1/2～2/3 position

5.5 Hydraulic oil

Working temperature @-30℃～5℃,hydraulic oil is L-HV32

Working temperature @5℃～25℃,hydraulic oil is L-HM46

Working temperature @25℃～40℃,hydraulic oil is L-HM68

5.6 Oil Tank Capacity

60L

5.7 Hydraulic Pump

Type: Gear pump

Displacement: 10 ml/r

Max speed: 3000 r/min

5.8 Hydraulic Motor

Type: Gear motors

Displacement: 160 ml/r

Max speed: 385 r/min

6) Water Sprinkling System

6.1 Main component

Electric water pump、water filter, nozzle, water tanker, etc.

6.2 Maximum Working Pressure

140 bar

6.3 Peak Valve

225 bar

6.4 Maximum Torch

130N.m

6.5 Maximum Working Speed

615rpm

6.6 Water Spray

Spray bar in the front, on the side brush, cylinder brush, and suction nozzle.

6.7 Wandering Hose

Located on the rear part of the sweeper, water injection for dust control.

7) Electrical System

7.1 Con-structure

Two batteries(in series)

7.2 Voltage

12V

7.3 Battery Request

12-80A.h

8) Sweeping System

8.1 Type

Fours brushes are installed between the front and rear axle, driven by gerotor motor. Left and right brushes are controlled to lift up and down separately. The rear brushes and suction nozzle are gang controlled for up and down.

8.2 Sweeping disc diameters

Φ850mm

8.3 Sweeping disc speed

High speed:110r/min Medium ; 80 r/min low: 60 r/min

8.4 Sweeping disc tilt angle

Front tilt 4°～6°; right and left tilt 2°～4° 6°～10°

9) Suction System

9.1 Type

U-shaped servo Suction nozzle

9.2 Suction hose diameters

Φ190mm

9.3 Nozzle ground clearance

5～10mm

10) Suction System

10.1 Control Panel

All control functions of the sweeper are done inside the cabin

10.2 Auxiliary Control

ON/OFF Switch

11) Others

11.1 Components

Backup camera;

Dust hopper self-cleaning hose and nozzle;

Front Spray Bar;

Rear LED Lamp

12) Painting

12.1 Both Painted

The exterior and interior of the tank are spray painted with high-quality painting

12.2 Exterior

Spray-painted with two coats of superior quality anti-corrosive primer and two coats of enamel metal paint of a reputed make.

12.3 Under Chassis

Coated with anti-corrosion.